front-panel error messages
Front-Panel Error Messages 39
Printheads require alignment.
Load paper and select Align
printheads.
Press ENTER to finish
The printer has detected that the printheads need to be aligned.
Press the Enter key to continue. Load a sheet or roll of paper, and select Align
printheads from the Ink menu. See “Aligning Printheads” on page 44 on the reverse
of this Pocket Guide.
Printheads require alignment.
Press ENTER to align
The printer has detected that the printheads need to be aligned.
Press the Enter key to align them. See “Aligning Printheads” on page 44 on the
reverse of this Pocket Guide.
Problem found during
calibration
A general problem was found during the Advance calibration routine.
Respond to any other messages that appear on the front panel, indicating ink or
paper problems, and then retry the Advance calibration routine.
Message Explanation and Action
To Next Page
Loading...
