replace ink cartridges and printheads
Replacing Ink Cartridges 35
Replacing Ink Cartridges
If the printer detects that an ink cartridge needs
replacing, you will see a message with four icons
(explained below), referring from left to right to the
Cyan (•), Black (•), Magenta (•) and Yellow (•)
cartridges.
The icons may be any of the following:
The cartridge is OK; the approximate level of
the ink is indicated—a full cartridge has the
whole interior black;
Flashing; the cartridge is missing, and the
correct one must be inserted as indicated in
subsequent steps;
Flashing exclamation mark; the cartridge is
low on ink, and needs replacing at the
earliest opportunity; the ink level may show up
to
1
/
8
full, and for some CAD drawings this
can be adequate for an appreciable time;
Flashing pump; the cartridge is out of ink,
and must be replaced before any further
printing can be done;
Flashing cross; the wrong cartridge is
installed, and must be replaced before any
further printing can be done.
To Next Page
Loading...
