HP Designjet T1100

HP Designjet T Series — Service Manual 6-55
Removal and Installation - Ink Supply Tubes Support Rail (T1100/T1100ps/T610)
Ink Supply Tubes Support Rail (T1100/T1100ps/T610)
Removal
1. Remove the Right Cover on page 6-27.
2. Re
move the Left Cover on page 6-30.
3. Re
move the Front Panel on page 6-47.
4. Re
move the Top Cover on page 6-50.
5. Re
move the Window Position Sensor on
page 6-53.
6. Remove the Ink Supply Tubes from the Ink
Supply Tubes Support Rail.
7. Remove the T-15 screws that secure the
rear attachment brackets to the Ink Supply
Tubes Support Rail.
Switch off the printer and remove the power cable.