HP Designjet T Series — Service Manual 6-87
Removal and Installation - Right Spindle Holder and Rewinder (T1120/T1120ps)
Right Spindle Holder and Rewinder (T1120/T1120ps)
The Rewinder is only applicable to the 44 inch printers.
For 24 inch models, see
Right Spindle Holder (24” ONLY) on page 6-81.
Removal
1. Remove the Spindle on page 6-79.
2. Re
move the Right Cover on page 6-27
3. Remove the grounding cable attachment
screw from the metal sideplate.
4. Disconnect the Rewinder and encoder
cables from the L1 Harness.
Switch off the printer and remove the power cable.
To Next Page
Loading...