HP Designjet T1100

HP Designjet T Series — Service Manual 6-91
Removal and Installation - Out Of Paper Sensor
Out Of Paper Sensor
Removal
1. Remove the Spindle on page 6-79.
2. Re
move the Clean Out Assembly on page
6-90.
3. Unroute the Out Of Paper Sensor electrical
cables from the Clean Out Assembly.
4. Unroute (unwind) the Out Of Paper Sensor
electrical cables from the Out Of Paper
Sensor cover.
5. Press the clip to remove the Out Of Paper
Sensor cover from the Clean Out
Assembly.
Switch off the printer and remove the power cable.