HP Designjet T1100

HP Designjet T Series — Service Manual 1-30
Print quality troubleshooting
Shown below is an example of what you might see if you have problems
with the paper not being flat:
Corrective Action
1 Check that the paper type loaded corresponds to the paper type selected in
the
front panel and in the software. You can verify the paper type selected
through the Front Panel (Main Menu/Paper menu/View loaded paper).
2 T
ry using a heavier paper type. When pr
inting dense colors, it is
recommended to use HP Heavyweight Coated Paper or HP Super
Heavyweight Coated Paper.
Ink marks on the paper
This problem may occur for several different reasons.