HP Designjet T Series — Service Manual 6-168
Removal and Installation - Carriage Cover and Carriage Latch (T1120/T1120ps)
Carriage Cover and Carriage Latch (T1120/T1120ps)
Removal
1. Remove the Right Cover on page 6-27.
2. Re
move the Left Cover on page 6-30.
3. Re
move the Front Panel on page 6-47.
4. Re
move the Top Cover on page 6-50.
5. Re
move the Window Position Sensor on
page 6-53.
6. Open the Carriage Cover.
7. Remove all the Printheads.
Switch off the printer and remove the power cable.
To Next Page
Loading...