HP Designjet T Series — Service Manual 1-46
Ink Supplies Troubleshooting
11 Push the cartridge into the slot until it snaps into position. You should hear a
beep and see confirmation that the cartridge has been inserted.
12 When all cartridges have been inserted, close the cover.
Printhead Information, Replacement and Alignment
Obtaining Printhead Information
1 Scroll to the Ink Menu icon and press OK.
2 In the Ink Menu submenu, scroll to Printhead information and press
OK.
3 In the Printhead Information submenu, scroll to the Printhead that you want
information on and press OK.
4 The front panel displays information on the selected Printhead.
The information supplied is:
To Next Page
Loading...