EasyManuals Logo

HP Designjet T1300 Instructions

HP Designjet T1300
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
180°
4+4=8
4x
EN
FR
IT
ES
PT
RU
DE
Attach a foot to each leg, using four screws in each
foot. First t all four screws loosely, then tighten
them up.
Fixez un pied à chaque montant, en utilisant quatre
vis pour chaque pied. Fixez d’abord les quatre vis
de manière lâche, puis serrez-les.
Befestigen Sie an jedem Standbein einen Fuß.
Sie benötigen dabei für jeden Fuß vier Schrauben.
Drehen Sie alle vier Schrauben zunächst nur locker
ein, und ziehen Sie sie dann der Reihe nach fest.
Fissare un piedino a ciascun piede utilizzando quattro
viti per ciascuno. Avvitare dapprima tutte e quattro
le viti non completamente, quindi stringerle.
Fije los pies a las patas utilizando cuatro tornillos
en cada pie. Primero, ajuste los cuatro tornillos sin
apretar y después, apriételos.
Fixe o pé em cada uma das pernas usando quatro
parafusos para cada pé. Primeiro, posicione os quatro
parafusos deixando-os soltos e depois aperte-os.
Прикрепите к каждой стойке ножку четырьмя
винтами. Сначала неплотно вверните все четыре
винта, а затем затяните их накрепко.
Make sure you have used 4 screws in each leg.
Vériez que vous avez utilisé 4 vis sur chaque
montant.
Achten Sie darauf, dass jeder Fuß mit vier Schrauben
befestigt ist.
Assicurarsi di utilizzare 4 viti per ogni piede.
Asegúrese de que ha utilizado cuatro tornillos
en cada pata.
Certique-se de que você usou quatro parafusos em
cada perna.
Убедитесь, что каждая стойка закреплена
четырьмя винтами.
Remove the small aps from each of the foam
end pieces.
Do not remove the foam end pieces.
Retirez les petits rabats de chacun des embouts
en mousse.
Ne retirez pas les embouts en mousse.
Nehmen Sie die kleinen Einlagen von den
Styroporendstücken ab.
Entfernen Sie aber nicht die Styroporendstücke.
Rimuovere le alette da ognuno degli imballaggi
di polistirolo.
Non rimuovere gli imballaggi di polistirolo.
Retire las pequeñas solapas de cada una de las piezas
de espuma de los extremos.
No retire las piezas de espuma.
Retire as pequenas bordas de cada parte de espuma.
Não retire as partes de espuma.
Удалите небольшие клапаны с каждой
из пенопластовых концевых накладок.
Не снимайте концевые накладки.
Return to the main body of the product, carefully turn
the product upside down in order to attach the legs.
You may need a third person.
Revenez sur la partie principale du produit et retournez
cette dernière avec soin an de xer les montants.
Vous pourriez avoir besoin d’une tierce personne.
Begeben Sie sich wieder zur Basiseinheit. Drehen Sie
das Produkt vorsichtig herum, damit die Standbeine
montiert werden können. Bitten Sie ggf. eine dritte
Person um Hilfe.
Tornare al corpo principale del prodotto
e capovolgerlo con cautela per il montaggio
dei piedi. Potrebbe essere necessaria una terza
persona.
Vuelva al cuerpo principal del producto,
con mucho cuidado gírelo boca abajo para jar las
patas. Puede que necesite la ayuda de otra persona.
Recoloque o corpo principal do produto e vire-o de
cabeça para baixo para prender as pernas. Pode ser
necessário obter ajuda de outra pessoa.
Вернитесь к корпусу принтера и осторожно
переверните его, чтобы прикрепить стойки.
Может потребоваться третий человек.
16
16
17
1815
Hewlett-Packard Company - Learning Products - Barcelona

Other manuals for HP Designjet T1300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Designjet T1300 and is the answer not in the manual?

HP Designjet T1300 Specifications

General IconGeneral
ColorYes
Printing colorsCyan, Grey, Magenta, Matte black, Photo black, Yellow
Print technologyThermal inkjet
Resolution color2400 x 1200 DPI
Number of print cartridges6
Page description languagesHP-GL/2, PCL 3 GUI, PDF 1.7, PostScript 3, TIFF
Print speed (line, black, normal quality, A1)80 pph
Maximum print size1118 x 1676 mm
Media width (rolls)279 to 1118 mm
Media width (sheets)210 to 1118 mm
Maximum roll diameter135 mm
Paper tray media typesBond paper, Coated paper, Glossy paper, Matte paper, Photo paper
USB connectorUSB Type-A
USB 2.0 ports quantity1
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorBlack, White
Sound power level (standby)29 dB
Sound pressure level (printing)43 dB
Power supply120 W
Power consumption (off)0.1 W
Power consumption (standby)27 W
Package depth766 mm
Package width1930 mm
Package height770 mm
Package weight109000 g
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth721 mm
Width1770 mm
Height1050 mm

Related product manuals