HP Designjet T920 series

* For a list of supported papers, see Order paper on page 141.
Table 23-4 Margins
Top, right and left margins 5 mm (0.2 in)
Bottom margin (trailing edge) 5 mm (0.2 in) (roll)
22 mm (0.87 in) (sheet)
Table 23-5 Mechanical accuracy
±0.1% of the specified vector length or ±0.2 mm (whichever is greater) at 23°C (73°F), 50-60% relative humidity, on E/A0 printing
material in Best or Normal mode with HP Matte Film roll feed.
Table 23-6 Graphic languages supported
HP Designjet Languages
T920 HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, URF
T920 PS HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, URF, Adobe PDF 1.7, Adobe PostScript 3
T1500 HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, URF
T1500 PS HP PCL3GUI, HP-GL/2 and HP RTL, CALS G4, TIFF, JPEG, URF, Adobe PDF 1.7, Adobe PostScript 3
Physical specifications
Table 23-7 Printer physical specifications
HP Designjet T920 series HP Designjet T1500 series
Weight 87 kg (192 lb) 88 kg (194 lb)
Width 1399 mm (55.08 in) 1399 mm (55.08 in)
Depth 916 mm (36.1 in) (stacker and basket open)
693 mm (27.3 in) (stacker and basket closed)
916 mm (36.1 in) (stacker and basket open)
693 mm (27.3 in) (stacker and basket closed)
Height 1110 mm (43.7 in) (stacker and front panel deployed)
950 mm (37.4 in) (stacker and front panel folded)
1110 mm (43.7 in) (stacker and front panel deployed)
950 mm (37.4 in) (stacker and front panel folded)
Memory specifications
Table 23-8 Memory specifications
HP Designjet Physical DRAM Virtual file-processing
memory
Hard disk
T920 series 1.5 GB 32 GB 320 GB
T1500
series 1.5 GB
64 GB 320 GB
194 Chapter 23 Printer specifications ENWW