32
install a Bluetooth SDI/O expansion card
If your Palm device does not come with a built-in Bluetooth feature, follow these steps
to install a Bluetooth SDI/O card:
1. Verify that the Bluetooth SDI/O card software has been installed on your
computer.
2. Perform a HotSync operation.
A message appears on the Palm PDA after the HotSync operation is complete.
3. Insert the SDI/O card in the expansion slot.
Warning:
You must install the software files before inserting the Bluetooth
card in the Palm PDA. Otherwise, the card will not function
properly.
To Next Page
Loading...