43
printer is connected to computer but will not print or did not appear
If the printer will not print or does not appear in the printers list, you may have
entered the incorrect setting for encryption required. The settings on the PC must
match the settings that are on your hp deskjet 450 series printer.
1. Print a Bluetooth configuration page
.
2. Check the Encryption Required Line.
•If
Encryption = Off, then encryption and authentication are off, and you
must choose
No.
•If
Encryption = On, then encryption and authentication are on, and you
must choose
Yes.
If your settings do not match, you must delete the printer and then re-run the
Wireless utility:
1. Click
Start > Control Panel.
2. Double-click the Wireless Link icon.
3. Click the
Bluetooth tab.
4. Highlight the
hp deskjet 450 printer.
5. Press
delete.
6. Restart the procedure to connect the printer to the computer using HCRP
on
page 8.
You can also reset your printer to factory defaults which has
encryption/authentication off (see reset to factory defaults
on
page 58).
To Next Page
Loading...