HP Deskjet 450 series - PIN Code Configuration; Access Modes Explained; Changing the Printers Wireless Feature; Install USB Driver for Settings

50
PIN code
When the printer is set to encryption required (see page 51), devices attempting to
use the printer are prompted for a PIN code.
The default PIN code is
0. You can change the PIN code by using the Configure
Bluetooth Settings dialog box. See change wireless settings
on page 54.
access modes
Access modes determine the level of access that Bluetooth-enabled devices have to
the printer.
The printer has four access modes:
• public mode
• private mode
• turn off Bluetooth
• encryption required
To set the access mode for the printer, use the Configure Bluetooth Settings
dialog box. See change wireless settings
on page 54.
public mode
When the printer is in Public Mode, any Bluetooth-enabled device within range
can discover the printer.