HP Deskjet 450 series - Page 59

56
Configure Bluetooth Settings dialog box
Use the Configure Bluetooth Settings dialog box to set the following options:
1.
Device Address: Address by which Bluetooth devices identify the printer.
2.
Printer Name: Use for change the printer’s Bluetooth device name
(see page 57).
3.
Change PIN Code: Click for change the printer’s PIN code (see page 57).
Setting a PIN code and checking Encryption Required turns Authentication
on. See encryption required
and authentication required on page 51.
4.
Reset Device Access: Click for reset device access (see page 58) from the
printer’s memory.
5.
Mode: Set the following options:
•
Private mode: The printer can be discovered only by devices that have
stored its address. See private mode
on page 51.
•
Public mode: The printer can be discovered by all Bluetooth-enabled
devices. See public mode
on page 50.
•
Turn off Bluetooth: Disable Bluetooth wireless printing.
•
Encryption Required: When Encryption Required checkbox is selected,
all data sent to the printer is encrypted. This option also automatically
sets authentication. See encryption required
and authentication required
on page 51.




