21
English
Right print cartridge LED on. Black or photo print cartridge is low on ink.
• Replace the print cartridge. See Replacing the print cartridges in the
onscreen user’s guide.
Right and Left print cartridge
LEDs on.
Tri-color and black or photo print cartridges are low on ink.
• Replace the print cartridges. See Replacing the print cartridges in the
onscreen user’s guide.
Power LED off, Resume LED blinks. Media jam or paper motor stall.
• Clear the jammed paper. See Print media is jammed in the onscreen
user’s guide. After clearing the jam, press the Resume button to
continue the print job.
If no paper jam exists, press the Resume button. If this does not work,
try turning the printer off and then on again, and resend the print job.
Power LED blinks,
Resume LED blinks.
Media jam or carriage stall.
• Clear the jammed paper. See Print media is jammed in the onscreen
user’s guide. After clearing the jam, press the Resume button to
continue the print job.
If no paper jam exists, press the Resume button. If this does not work,
try turning the printer off and then on again, and resend the print job.
Power LED blinks, Resume LED
blinks, Left and Right print cartridge
LEDs on.
Media jam or service station stall.
• Clear the jammed paper. See Print media is jammed in the onscreen
user’s guide. After clearing the jam, press the Resume button to
continue the print job.
If no paper jam exists, press the Resume button. If this does not work,
try turning the printer off and then on again, and resend the print job.
Power LED turns on twice as long
as off.
Print job is being canceled.
• No action required.
Power LED, Resume LED, Left and
Right print cartridge LEDs on.
New firmware is being flashed to the printer.
• No action required.
LED indication Explanation and recommended action
Crystal_LED_ENG.fm Page 21 Tuesday, July 8, 2003 3:20 PM
To Next Page
Loading...