ENWW 1-2
Understanding printer parts and functions
Front view
1 Input tray extension – Slides up to support larger print media. This
prevents possible media feed problems. Pull this up for all media except A5
paper and cards.
2 Input tray – Holds the media. Remove media and close this tray when the
printer is not in use.
3 Paper guide – Slides to fit the width of the media. Guides paper edge and
prevents paper skew.
4 Card slot – Flips down to feed media of 4.72 in (120 mm) width or less,
such as 4 x 6 in index cards, small photo media and Japanese Hagaki
cards. Ensures that media is properly aligned for correct print margins.
5 Alignment guide – Guides larger media such as Letter or A4 loaded in the
input tray into the printer. Ensures that media is properly aligned for correct
print margins.
6 Print cartridge latch – Facilitates easy removal and insertion of print
cartridges. Lifts to allow each print cartridge to be removed from its socket.
7 Print cartridge socket – Holds the print cartridge.
8 Output slot – Media exits printer from here.
9 Front access cover – Provides access to the print cartridges and for
clearing paper jams. This cover must be closed in order to print.
10 Infrared port – Enables printing from an infrared-sending device, such as
a notebook or PDA.
57
58
56
8
9
3
2
1
4
5
6
7
10
To Next Page
Loading...