HP DeskJet 5000 series - Page 360

Functional Overview
10-10
HP DesignJet 5000 Series Printers Service Manual
Printer Specifications
Functional Specifications
HP No.81 Supplies
Six colors: cyan, light cyan, magenta, light magenta yellow and black.
Printheads:
15.0 kHz
Cyan, light cyan, magenta, light magenta, yellow and black.
Printhead Cleaners: Cyan, light cyan, magenta, light magenta, yellow and black.
Ink Cartridges: Cyan, light cyan, magenta, light magenta, yellow and black each
delivering 680cc of ink
Media sizes
Width (carriage axis) Length (paper axis)
Minimum Maximum Minimum Maximum
Roll 610mm 60 inch/1.52m
42 inch 1.07m
N/A 300ft with light coated
media
Sheet 210 mm E/A0 594mm/22in 1.6m
HP Supported Medias
HP Coated Paper
HP Coated Paper, 300ft
HP Heavyweight Coated Paper
HP Photo Imaging Gloss
HP Photo Imaging Satin
HP Paper Based Semi-Gloss
HP Studio Canvas
HP Colorfast Adhesive Vinyl
HP Banners with Tyvek™
HP Colorlucent Backlit UV
HP Satin Poster Paper
From time to time, new paper types may become available. For up-to-date information, please contact our web
site www.hp.com/go/designjet
Print Mode Default Enhanced Resolution
Print resolution Max. Speed
Productivity
Max. Quality
300 x 300dpi.
300 x 300 dpi.
600 x 600 dpi
600 x 600
600 x 600
1200 x 600 dpi (Glossy media)
Roll (normal) Sheet (normal) Roll (Extended) Sheet (Extended)
Margins Side Margins 7mm
Leading edge Margin
35mm
Trailing Edge Margin
7mm
Side Margins 7mm
Leading edge Margin
35mm
Trailing Edge Margin
17mm
Side Margins 15mm
Leading edge
Margin 15mm
Trailing Edge
Margin 35mm
Side Margins 15mm
Leading edge Margin
35mm
Trailing Edge Margin
17mm
Programming
languages
supported
HP-GL/2 (with kanji level 1 and 2 character sets
HP-RTL
PJL, PML
Adobe PostScript 3 (supports Asian fonts)
Accuracy 0.2% of the specified vector length at 23°C (73°F), 50-60% Relative Humidity, on A0
media in Max. Quality or Productivity with HP special polyester film.