1. Copper contacts
Caution! Do not touch the print cartridge ink nozzles or copper contacts. Touching these
parts will result in clogs, ink failure, and bad electrical connections. Do not remove the
copper strips. They are required electrical contacts.
3. Close the top cover.
4. Press the Resume button.
Wait until the Power light stops flashing before printing a file.
paper problems
Click the topic below that best describes the problem:
● paper jam
● out of paper
● printer ejects the paper
paper jam
Follow each of these steps until the paper jam is cleared.
1. Remove the paper from the In and Out trays.
2. Press the Resume button.
3. If you are printing labels, verify that a label did not become detached from the
file:///C|/Projects/Newport/Mac_UG_huykuna/ug_notprinting_fs.html (2 of 5) [5/9/2002 9:41:18 AM]
To Next Page
Loading...
