1. Follow the onscreen instructions for printing the second side.
These instructions appear when you manually print a two-sided document.
2. Press the Resume button.
Power light is flashing
the printer is preparing to print
The light stops flashing when the printer has received all data.
all lights are flashing
the printer may need to be restarted
1. Press the Power button to turn off the printer, then press the Power button to
restart the printer.
Proceed to step 2 if the lights continue to flash.
2. Press the Power button to turn off the printer.
3. Disconnect the printer from the power source.
4. Reconnect the printer to the power source.
5. Press the Power button to turn on the printer.
file:///C|/Projects/Newport/Mac_UG_huykuna/ug_flashing_light_problems_fs.html (2 of 2) [5/9/2002 9:41:20 AM]
To Next Page
Loading...
