border is on side of image
if your printout looks like this...
do this...
Calibrate the printer.
image is above tear-off tab
if your printout looks like this...
do this...
Calibrate the printer.
ink smears
if your printout has ink smears...
If ink smears appear on the back of the printouts or if the paper sticks together...
do this...
file:///C|/Projects/Newport/Mac_UG_huykuna/ug_borderless_problems_fs.html (2 of 3) [5/9/2002 9:41:23 AM]
To Next Page
Loading...
