automatic two-sided printing module (duplexer)
The Automatic Two-Sided Printing Module (duplexer) is a special hardware feature that
enables the printer to automatically print on both sides of a page.
installing the duplexer
1. Turn the latch counterclockwise on the printer’s Rear Access Door and remove the
door.
Do not discard the Rear Access Door. In order to print, the Automatic Two-Sided
Printing Module or the Rear Access Door must be attached to the printer.
2. Insert the Automatic Two-Sided Printing Module in the back of the printer until
both sides snap into place.
file:///C|/Projects/Newport/Mac_UG_huykuna/ug_duplexer_fs.html (1 of 2) [5/9/2002 9:40:57 AM]
To Next Page
Loading...
