labels
printing guidelines
● Use only paper labels that are designed specifically for inkjet printers.
● Use only full sheets of labels.
● Verify that the labels are not sticky, wrinkled, or pulling away from the
protective backing.
● Do not use plastic or clear labels. The ink will not dry on these labels.
● Never place more than 20 sheets of labels in the In tray at one time.
preparing to print
1. Remove the Out tray.
2. Slide out both paper guides, then remove all paper from the In tray.
3. Fan the edges of the label sheets to separate them, then align the label edges.
4. Load up to 20 label sheets. label side down. in the In tray.
5. Slide the paper guides firmly against the sheets.
6. Replace the Out tray.
file:///C|/Projects/Newport/Mac_UG_huykuna/ug_labels_fs.html (1 of 3) [5/9/2002 9:41:08 AM]
To Next Page
Loading...
