9
Step 5: Load paper in your printer
1
Pull out the IN tray and slide the paper-width and paper-
length adjusters out as far as possible to make room for the
paper.
Flip up the OUT tray for a better view of the IN tray.
2
Remove a stack of paper from its packaging. (Make sure all
the paper in the stack is the same size and type.) Tap the
stack on a flat surface to even it up.
3
Load the paper into the IN tray,
printable side down
. The IN
tray holds up to 10 mm or 3/8 inch at a time.
4
Push the paper toward the back of the paper tray until it
stops.
OUT Tray
IN Tray
Paper-width
adjuster
Paper-length
adjuster
To Next Page
Loading...