HP Deskjet D1600 Series - Page 5

Windows: Mac:
Ink usage
Power specifications:
Power adapter: 0957-2289
Input voltage: 200-240Vac (+/- 10%)
Input frequency: 50/60 Hz (+/- 3Hz)
Power consumption: 12 watts maximum (average printing)
Note: Use only with the power adapter supplied by HP.
Note: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization
process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear
and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information
see www.hp.com/go/inkusage.
Installation Troubleshooting
If you are unable to print a test page:
Make sure the cable connections are secure.
See the setup poster.
Make sure the printer is powered on.
The [On button] will be lit green.
•
•
If you are still unable to print, or the Windows
software installation fails:
Installation Troubleshooting
If you are unable to print a test page:
To uninstall the software:
Disconnect the HP product from your computer.
Open the Applications: Hewlett-Packard folder.
Double-click HP Uninstaller. Follow the onscreen
instructions.
1.
2.
3.
Remove the CD from the computer’s CD-ROM
drive, and then disconnect the USB cable from the
computer.
Restart the computer.
Temporarily disable any software firewall and
close any anti-virus software. Re-start these programs
after the printer software is installed.
Insert the printer software CD in the computer’s
CD-ROM drive, then follow the onscreen instructions
to install the printer software. Do not connect the
USB cable until you are told to do so.
After the installation finishes, restart the computer.
1.
2.
3.
4.
5.
Make sure the printer is set as your default printing
device:
Windows Vista: On the Windows taskbar, click
Start, click Control Panel, and then click Printers.
Windows XP: On the Windows taskbar, click Start,
click Control Panel, and then click Printers and
Faxes.
Make sure that your printer has a check mark in the
circle next to it. If your printer is not selected as the
default printer, right-click the printer icon and choose
“Set as default printer” from the menu.
•
•
Make sure the cable connections are secure. See the
setup poster.
Make sure the printer is powered on.
The [On button] will be lit green.
•
•
To install the software:
To install the software, connect the USB cable.
Insert the HP software CD into your computer’s CD
drive.
On the desktop, open the CD and then
double-click HP Installer.
Follow the onscreen and the printed setup
instructions that came with the HP product.
1.
2.
3.
4.
If you are still unable to print, uninstall and
reinstall the software:
Note: The uninstaller removes all of the HP software
components that are specific to the device. The uninstaller
does not remove components that are shared by other
products or programs.
English