To load index cards in the input tray
1. Remove all paper from the input tray.
2. Insert the stack of cards, with the side you want to print on facing down, into the far-
right side of the input tray. Slide the stack of cards forward until it stops.
3. Slide the paper-width guide inward against the stack of cards until it stops.
Do not overload the input tray; make sure the stack of cards fits within the input tray
and is no higher than the top of the paper-width guide.
For best results, set the paper type before copying or printing.
Related topics
•
Load 10 x 15 cm (4 x 6 inch) photo paper
•
Change the print settings for the current job
•
Set the copy paper type
Load envelopes
You can load one or more envelopes into the input tray of the HP All-in-One. Do not use
shiny or embossed envelopes or envelopes that have clasps or windows.
NOTE: For specific details on how to format text for printing on envelopes, consult
the help files in your word processing software. For best results, consider using a label
for the return address on envelopes.
Chapter 6
26 Load originals and load paper
Load originals and load paper
To Next Page
Loading...