To make a borderless copy of a photo from the control panel
1. Load 10 x 15 cm (4 x 6 inch) tabbed photo paper in the input tray. Verify that the tab
is pointing away from the product.
NOTE: To make a borderless copy, you must use tabbed photo paper.
2. Load your original print side down on the left front corner of the glass.
3. Press Paper Type to select the Photo paper type.
NOTE: When the Photo paper type is selected, the HP All-in-One defaults to
making a borderless copy with a 10 x 15 cm (4 x 6 inch) original.
4. Press Start Copy Color.
Remove the tab to make the copy completely borderless.
Related topics
Control panel buttons
Stop copying
To stop copying
▲ Press Cancel on the control panel.
Stop copying 57
Use the copy features
To Next Page
Loading...