Label Icon Name and Description
When the HP All-in-One is off, a minimal amount of power is still used by the
product. To completely disconnect the power supply to the HP All-in-One,
turn the product off, and then unplug the power cord.
CAUTION: Before you unplug the power cord, you must press the On
button and allow the HP All-in-One to turn itself off. This prevents the print
cartridges from drying out.
Status light overview
Several indicator lights inform you of the status of the HP All-in-One.
Label Description
1 Ink Level lights
2 Check Print Cartridge lights
3 Paper Selection lights (for the Paper Selection
button)
4 Enlarge/Fit to Page light
5 Resume light
6 On light
Chapter 2
(continued)
12 HP All-in-One overview
HP All-in-One overview
To Next Page
Loading...