Sleep mode
●
Power usage is reduced while in Sleep mode.
●
After initial setup of printer, the printer will enter Sleep mode after 5 minutes of inactivity.
●
The Power button light is dimmed and the printer control panel display is o in Sleep mode.
●
Pressing any button on the control panel, or sending a print or scan job can wake up the printer from
sleep mode.
To change the time to Sleep mode
1. Open the embedded web server (EWS). For more information, see Open the embedded web server
on page 76.
2. Click the Settings tab.
3. In the Power Management section, click Energy Save Mode, and select the desired option.
4. Click Apply.
ENWW Sleep mode 27
To Next Page
Loading...