Equipment symbols
The following equipment symbols may be found on hardware for which
this guide pertains.
WARNING!
Any enclosed surface or area of the equipment marked
with these symbols indicates the presence of electrical shock hazar ds.
Enclosed area contains no operator serviceable parts.
WARNING: To
reduce the risk of personal injury from electrical shock hazards, do not
open this enclosure.
WARNING!
Any RJ-45 receptacle marked with these symbols indicates a
network interface connection.
WARNING: To reduce the risk of electrical
shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
WARNING!
An y surface or ar ea of the equipment marked with these
symbols indicates the presence of a hot surface or hot component.
Contact with this surface could result in injury.
WARNING: To reduce
the risk of personal injury from a hot component, allow the surface to
cool before touching.
WARNING!
Powersuppliesorsystemsmarkedwiththesesymbols
indicatethepresenceofmultiplesourcesofpower.
WARNING: To
reduce the risk of personal injury from electrical shock, remove all p ower
cords to completely disconnect power from the power supplies and
systems.
12
About this guide
To Next Page
Loading...
