Need help?Do you have a question about the HP ProLiant ML110 G1 and is the answer not in the manual?
General| Form Factor | Tower |
|---|---|
| Processor | Intel Pentium 4 |
| Power Supply | 300W |
| Drive Bays | 4 x 3.5" |
| RAID Support | Optional RAID 0, 1 |
| Network Interface | 1 x 10/100/1000 Mbps Ethernet |
| Operating System Support | Red Hat Linux |
| Expansion Slots | 6 (2 x PCI-X, 4 x PCI) |
Specifies the target users and their required experience for this manual.
Lists additional HP resources and documentation relevant to the storage server.
Explains document formatting, text symbols, and equipment icons used in the guide.
Instructions for deploying the storage server on a network.
Details on collecting necessary data for initial server configuration.
Explains how to use the Web-based User Interface for server setup.
Overview of physical, logical, file system, and file sharing components.
Discusses the lowest level of storage management at the physical drive level.
Explains combining physical drives into arrays and protecting data from failures.
Describes default storage configurations for 100 series ProLiant servers.
Details the physical configuration of hard disk drives for various server models.
Explains the storage setup for servers equipped with four hard drives.
Describes default storage configurations for 300 and 500 series ProLiant servers.
FCC regulations and compliance information for Class A and B digital devices.
Safety guidelines and warnings for optical storage devices utilizing lasers.
Compliance information and standards for international markets.
General safety precautions, including battery handling and static discharge prevention.
To Next Page