4. Enter the default user name and passwor d to log in to DP Storage
Server.
NOTE:
The default login is
Administrator
and the password is
hpinvent
.
Using the Integrated Lights-Out (iLO) method (ML310 G3
and DL380 D4)
You can access the DP Storage Ser ver using the iLO p or t and a Web
browser from a client PC.
1. Connect the Ethernet cable to the iLO port of the DP Storage
Server and corresponding network segment.
2. PowerontheDPStorageServerandwaitseveralminutesforthe
iLO to be accessib le on the network.
3. Open a Web browser on the client PC, and then enter the IP
address or the name of the iLO connection.
NOTE:
ThedefaultiLOnameis
iLO<serial number>
.Thedefaultusername
is
Administrator
. The default password is on the tag attached to
the server.
4. Use the license key supplied with the Integrated Lights-Out
Advanced Pack to enable the advanced iLO features.
NOTE:
The Intelligent Platfor m Management Interface (IPMI) method (DL100 G2
only) is handled through the use of Server Management Software (SMS)
loaded on the DL100 G2. For complete information on IPMI usage ,
please see the SMS help files available on the DP Storage Server.
Install the Windows Multilingual User Interface (MUI)
(optional)
The latest HP ProLiant Storage Server Service Release (SR) DVD i ncludes
Microsoft Windows Multilingua l User Interface (MUI) pack. The
Windows MUI pack is a set of language-spe cificresourcefiles that
HP ProLiant Data Protection Storage Ser ver user guide
25
To Next Page
Loading...
