HP DL380 - ProLiant G4 9 TB Data Protection Storage Server NAS - ML310 G3 Storage Configurations

Table6DL100G26TBDPStorageServer(two-HDD)2–MSA20
drive configurations
Logical
drive
RAID level
Size/allocation
Purpose
Array A
1
RAID 5
2 TB across the array . Backup
data
2
RAID 5
Remaining space across the
array.
Backup
data
Array B
1
RAID 5
2 TB across the array . Backup
data
2
RAID 5
Remaining space across the
array.
Backup
data
1
1
For each array, one hot spare drive is available.
Storage for ML310 G3 DP Storage Servers
Storage is preconfigured for the ML310 G3 1TB D P Storage Server prior to
shipment from the factory. No additional storage configuration is needed.
The 1TB model can be reconfigured using the HP Storage Manager utility.
Physi cal configuration
ThefourharddrivesincludedwiththeML310G3DPStorageServer
are configured for hardware RAID fault tolerance using the RAID Array
HP 6-Port SATA RAID Controller. The HDDs are hot-pluggable and
hot-swappable. The drives can be removed and installed with the power
on. The controller determines whether arebuildofthedriveisnecessary.
TheML310G3DPStorageServerusesMicrosoftDiskManager(DM)for
managing the logical drives presented to the file system. The DP Storage
Server uses all three logical partitions as p resented to it from the physical
storage layer. The first two logical drives are used for housing the OS
and DON’T ERASE basic partitions. The third logical drive houses the
data volume to be added into the DPM administrative console on a basic
partition.
HP ProLiant Data Protection Storage Ser ver user guide
37