26
9.4 Charging
The battery of remote controller is 200mAh. Using USB cable and adapter
to charge the battery.
Note:
(1) One remote can control more than one device. However, one device
can only pair one remote.
(2) Once paired, when you disconnect the device and re-connect it, it
doesn’t need to pair again. The remote will recognize the device that once
paired. You just need to press “laser” button on the device for 3 seconds.
(3) Please wait one second when you press again any button on the
remote. The remote distance is within 5 meters.
To Next Page
Loading...
