Description Spare part number
Wireless Antenna Kits
●
For use with standard display assemblies
489068-001
●
For use with Flush Glass display assemblies
489067-001
Display enclosures (includes logo light and cables)
●
For use with standard computer models with a camera/microphone module
486890-001
●
For use with bronze-colored computer models with a camera/microphone module
496734-001
●
For use with standard computer models
494967-001
●
For use with bronze-colored computer models
496742-001
●
For use with standard computer models with Flush Glass display assemblies
486875-001
●
For use with bronze-colored computer models with Flush Glass display assemblies
496733-001
●
For use in blue-colored computer models
502578-001
Rubber display bezel kits (contains all rubber pieces for the display bezel)
●
For use with standard computer models
496729-001
●
For use with bronze-colored computer models
486874-001
Miscellaneous display parts
●
Hinge trim for use on standard computer models with Flush Glass display assemblies
495629-001
●
Hinge trim for use on bronze-colored computer models with Flush Glass display
assemblies
502592-001
●
Hinge trim for use on blue-colored computer models
502595-001
●
Display trim for use with standard computer models with Flush Glass display
assemblies
486877-001
●
Display trim for use with bronze-colored computer models with Flush Glass display
assemblies
502593-001
●
Display trim for use with blue-colored computer models
502596-001
●
LCD cable for Flush Glass display assemblies
486878-001
●
Microphone cable for Flush Glass display assemblies
495631-001
●
LED transfer board for standard display assemblies 494977-001
Remove the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Turn the computer upside down on a flat surface.
6 Chapter 1 Removal and replacement procedures ENWW
To Next Page
Loading...
Need help?
General