9. If you are replacing an expansion card, store the old card in the
anti-static packaging that contained the new card.
10. While holding the expansion card bracket against the chassis,
slide the slot cover lock down toward the expansion card
brackets and slot covers to secure them in place and replace
the screw that secures the slot cover lock.
11. Complete the procedure described in the "Reassembling the
Computer" section of this chapter.
Hardware Reference Guide www.hp.com/in 2-24
Hardware Upgrades
2
1
Securing the Expansion Cards and Slot Covers
Photos depicted may vary as per actual machine
To Next Page
Loading...
