Memory Controller is integrated in the Processor (Supports DDR I type memories up to PC3200 (400 Mhz)
DDR SYNCH DRAM DIMM NON-ECC MEMORY
The HP business desktop dx5150 PC has four memory DIMM slots and supports dual channel memory configurations. It is required to
add memory in pairs; memory should be added in pairs and should be the same type. For example, 2x128-MB memory modules will
perform better on some applications than 1x256-MB memory module because of the dual channel memory support on the dx5150.
STANDARD MEMORY
Configurations can be selected with a 256-MB, 512-MB, 1024-MB, or 2048-MB memory. Memory types supported include PC3200 (DDR
400)
Various combinations of single-DIMM (for future upgradeability) and double-DIMM (for enhanced dual-channel memory performance)
will be offered. There are four DIMM slots available. 2 Of them are black, and two of them are blue to indicate the two different
channels. For best performance populate the DIMMs in pairs (Make sure to use identical memory DIMMs). Also, if only Two single sided
matched pairs are used place them in the Black Slots. Refer to the dx5150 service guide or the Hardware reference guide for supported
memory configurations.
QuickSpecs
HP dx5150 Business PC
Memory
DA - 12105 North America — Version 26 — July 10, 2007
Page 20
To Next Page
Loading...
Need help?
General