HP Elite Display E190i User Manual

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDisplay E190i 19-in 5:4 LED Backlit IPS Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
USB BD, IF BD, POWER BD, FK BD
4
Batteries
All types including standard alkaline and lithium coin
or button style batteries
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps Panel
1
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Power BD only (C805)
1
External electrical cables and cords
USB cable, D-sub cable, DVI cable, Power cord
4
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
EL-MF877-00 Page 1
Template Revision A

HP Elite Display E190i Specifications

General

Screen Size	19 inches
Resolution	1280 x 1024
Aspect Ratio	5:4
Panel Type	IPS
Brightness	250 cd/m²
Contrast Ratio	1000:1
Viewing Angles	178° horizontal; 178° vertical
HDCP Support	Yes
Connectivity	VGA, DVI
USB Ports	2 x USB 2.0
Stand Adjustments	Tilt
Response Time	8 ms

Summary

Items Requiring Selective Treatment

Tools Required

Product Disassembly Process

Optional Graphic for Disassembly

Optional graphic for disassembly process illustration.

External Electric Cables Dissecting Process

Process for dissecting external electric cables.

Remove Stand from Display Head

Steps to remove the stand from the display head.

Remove Rear Cover From Display Head

Procedure for removing the rear cover of the display.

Remove Front Cover From Display Head

Procedure for removing the front cover of the display.

Remove Rubber foot From Rear Cover

Steps to remove rubber feet from the rear cover.

Chassis Cover and Panel Removal

Removing screws from chassis cover and taking off the panel.

PCB Screw Removal

Procedure for removing screws from the Printed Circuit Board.

USB Connector Screw Removal

Procedure for removing screws from the USB connector.

PCB Screw Removal (Second Instance)

Procedure for removing screws from the Printed Circuit Board.

PCB & Bracket Removal

Removing PCB screws and detaching the Printed Circuit Assembly bracket.

Mylar Removal from Chassis

Procedure for removing Mylar material from the chassis metal.

LCD Panel Explode Process

Detailed steps for exploding the LCD panel assembly.

Electrolytic Capacitors Disassembly

Process for dissecting electrolytic capacitors over 25mm.