HP Elite t655 - Cathode Ray Tubes (CRT); Capacitors; condensers (Containing PCB;PCT); Electrolytic Capacitors; Condensers measuring greater than 2.5 cm; External electrical cables and cords

EL-MF877-00 Page 2
Template Revision D
last updated May-2022
HP Inc. instructions for this template are available at EL-MF877-01
Item Description
Components and parts requiring selective
treatments
Quantity of
items
included
in product
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
☐ Power Supply capacitor(s) or condenser(s)
0
External electrical cables and cords
☒ AC power cord
☐ Audio, video or data cables
☐ Other: _________
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
(not including external electrical cables and cords,
PCBs or PCAs already listed as a separate item
above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner.
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
Components containing chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC)
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver
PH0X50 screw
driver
Screwdriver
T15 screw
driver
Heatgun
N/A
Suction cup
N/A
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure.