b. Lift the top edge of the display panel (2).
c. Rotate the display panel over and place it upside down next to the display enclosure (1).
d. Lift the tape (2), and then disconnect the display panel cable (3) from the display panel.
The display panel is available using the following spare part numbers:
FHD panel: L32562-001
FHD, privacy panel: L32561-001
UHD panel: L32563-001-001
11. If it is necessary to replace the hinge covers:
a. Rotate the hinges as far as possible (1).
b. Remove the Phillips M2.0×2.0 screw (2) that secures each hinge cover to the display enclosure.
Component replacement procedures 61
To Next Page
Loading...
