This product is in compliance with the IEEE 1680 (EPEAT) standard at the
Silver level, see
www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per
ISO 11469 and ISO1043.
This product contains 0.33% post consumer recycled plastic (by wt.)
This product is greater than 85% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Paper – 97 g
Internal:
Polyethylene low density solid – 13 g
Molded Pulp – 100 g
Polyethylene low density – 4 g
The paper packaging material is made from 80% recycled content.
The Polyethylene low density solid material is made from 100%
recycled content.
The Molded Pulp packaging material is made from 80% recycled
content.
The Polyethylene low density material is made from 100% recycled
content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury
and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and
DIN 6120 standards.
Material Usage
Material UsageMaterial Usage
Material Usage
This product does not contain any of the following substances in excess of
regulatory limits (for reference of these limits please refer to the HP General
Specification of the
Environment (
http://www.hp.com/hpinfo/globalcitizenship/environment/
supplychain/gen_specifications.html
):
Asbestos
Certain Azo Colorants
QuickSpecs
HP EliteBook 2540p Notebook PC
HP EliteBook 2540p Notebook PCHP EliteBook 2540p Notebook PC
HP EliteBook 2540p Notebook PC
Technical Specifications
DA - 13566 North America — Version 8 — June 2, 2010
Page 36