EasyManuals Logo

HP EliteDisplay E221 Specification

HP EliteDisplay E221
9 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
© Copyright 2013 Hewlett-Packard Development Company, L.P.
ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
1
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting
surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the
VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to
determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
2
HP Care Pack Services extend service contracts beyond the standard warranties. Service levels and response times for HP Care Packs
may vary depending on your geographic location. Service starts from date of hardware purchase. To choose the right level of service
for your HP product, use the HP Care Pack Services Lookup Tool at
http://www.hp.com/go/lookuptool
. Additional HP Care Pack
Services information by product is available at
http://www.hp.com/hps/carepack
.
3
EPEAT® Gold registered models of this product are available where HP registers commercial display products. See
www.epeat.net
for
registration status in your country.
4
Arsenic and its compounds were not detected using US EPA Test Methods 3052 & 3052/6010b by ICP or ICP-AES with a with a Method
Detection Limit of 10 ppm.
5
External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be
Low Halogen.
All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either
higher or lower. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
QuickSpecs
HP EliteDisplay E221 21.5-inch LED Backlit Monitor
Technical Specifications
DA - 14551 North America — Version 7 — July 18, 2013
Page 9

Other manuals for HP EliteDisplay E221

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteDisplay E221 and is the answer not in the manual?

HP EliteDisplay E221 Specifications

General IconGeneral
3DNo
Product typePC monitor
Display diagonal21.5 \
Viewing angle, vertical160 °
Contrast ratio (dynamic)5000000:1
Contrast ratio (typical)1000:1
Display number of colors-
Viewing angle, horizontal170 °
Display brightness (typical)250 cd/m²
Supported graphics resolutions720 x 400, 1400 x 900, 1600 x 900, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
HDCPYes
USB hub version2.0
HDMI ports quantity0
USB Type-A downstream ports quantity3
Pivot angle0 - 90 °
Tilt angle range-5 - 30 °
Panel mounting interface- mm
Power consumption (max)36 W
Power consumption (standby)0.5 W
Power consumption (typical)30 W
Product colorBlack
Country of originChina
Market positioningBusiness
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Package weight7100 g
Sustainability certificatesEPEAT Gold, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)237 mm
Width (without stand)509 mm
Height (without stand)460 mm
Weight (without stand)5640 g

Related product manuals