HP EliteDisplay E273m User Manual

EL-MF877-00
Template Revision B
Page 2
PSG instructions for this template are available at EL-MF877-01
including PCBs or PCAs already listed as a
separate item above)
Components and parts containing toner
and ink, including liquids, semi-liquids
(gel/paste) and toner
Include the cartridges, print heads, tubes, vent chambers, and
service stations. 2
0
Components and waste containing
asbestos
0
Components, parts and materials
containing refractory ceramic fibers
0
Components, parts and materials
containing radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Screw driver of "+" type
200mm
Description #2 Hexagonal nut screw driver for DVI and D-SUB connector
200mm
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Lay the monitor on a flat, soft and clean surface.
2. Push the button release the stand-base ass'y
3. Remove the screws to release the Rear cover
4. Remove the cable pin, screws and tapes
5. Release the mainframe, take out the mylar
6. Remove the screws and cables to detach the MB & Power board
7. Remove the screws and seperate teh camera ass'y
8. Left Panel, middle frame with the keyboards and panel.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

HP EliteDisplay E273m Specifications

General

3D	No
Color gamut	72 %
Pixel pitch	0.311 x 0.311 mm
Screen shape	Flat
Pixel density	81.59 ppi
Display diagonal	27 \
Display technology	LED
Native aspect ratio	16:9
Vertical scan range	50 - 60 Hz
Maximum refresh rate	60 Hz
Horizontal scan range	30 - 80 kHz
Viewable size, vertical	336.3 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	597.8 mm
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+)
Depth	47.5 mm
Width	610 mm
Height	389 mm
Weight	7900 g
On/off switch	Yes
Pivot angle	0 - 90 °
Tilt angle range	-5 - 22 °
Number of OSD languages	10
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR
AC input voltage	100 - 240 V
Energy efficiency scale	A to G
Power consumption (max)	68 W
Annual energy consumption	37 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	32 W
USB hub version	3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-C
Number of upstream ports	1
USB Type-A downstream ports quantity	2
Operating altitude	0 - 5000 m
Non-operating altitude	5000 - 12192 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	EPEAT Gold, ENERGY STAR
RMS rated power	4 W
Product color	Black, Silver
Country of origin	China
Market positioning	Business
Cables included	AC, DisplayPort, USB Type-C to USB Type-A, VGA
Package weight	11230 g
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	214 mm
Height (with stand)	384 mm
Weight (without stand)	5050 g