HP EVA P6000 - Page 40

SmartStart for EVA -
Installation Software
Install and configure EVA P6000 using HP P6000 SmartStart configuration utility, which runs on Windows
Server systems. This software installs necessary drivers on Windows Server 2003 and 2008 application
servers and P6000 Command View / SBM v10.3 (or later version) on a Windows Server 2003 management
server, as well as provisions the storage. During installation, click to accept the terms of the HP P6000
SmartStart* configuration utility End User License Agreement (EULA). No separately orderable LTU is
required for HP P6000 SmartStart.
*For more information and ordering information on SmartStart, see:
http://h18000.www1.hp.com/products/storageworks/evasmartstart/relatedinfo.html?jumpid=
reg_R1002_USEN
Replication Solutions Manager
Replication Solutions
Manager - Local
Replication Management
Software
Replication Solutions Manager Software integrates with HP P6000 Business Copy Software and HP P6000
Continuous Access software for local and remote replication.
See the product URL for ordering information and part numbers:
http://h18006.www1.hp.com/products/storage/software/repsolmgr/index.html
P6000 Business Copy
P6000 Business Copy -
Local Replication Software
HP P6000 Business Copy is a local replication software product for the EVA family providing Snapshot and
clone set-up and management. Business Copy is sold by utilized capacity. For more information, see the
Business Copy description earlier in this document.
See the product URL for ordering information and part numbers:
http://h18006.www1.hp.com/products/storage/software/bizcopyeva/index.html .
P6000 Continuous Access
P6000 Continuous Access
- Remote Replication
Software
HP P6000 Continuous Access is a controller-based application that performs real-time replication between
HP enterprise virtual arrays. For more information, see Continuous Access description earlier in this
document.
Please see the product URL for ordering information and part numbers:
http://h18006.www1.hp.com/products/storage/software/conaccesseva/index.html .
P6000 Dynamic Capacity Management
P6000 Dynamic Capacity
Management Software -
Capacity Management
HP P6000 Dynamic Capacity Management Software is a comprehensive software solution that automates
storage provisioning and improves capacity utilization on the HP Enterprise Virtual Array (EVA) family. For
more information, see the DCM description earlier in this document.
See the product URL for ordering information and part numbers:
http://h18000.www1.hp.com/products/quickspecs/12815_div/12815_div.html
Multiple Path High Availability Software
Multiple Path High
Availability Software
Industry popular multiple path software is supported on EVA P6000s. This software is used to manage
multiple paths between hosts and storage systems. It enables high availability through path management
QuickSpecs
HP EVA P6000 Storage
Configuration Information and Configuration Rules
DA - 13904 Worldwide — Version 26 — September 30, 2013 Page 40