HP EVA P6000 - Page 7

monitor the entire backup from a single interface with HP Storage Essentials
*For more information on P6000 SmartStart see:
http://h18000.www1.hp.com/products/storageworks/evasmartstart/relatedinfo.html?jumpid=
reg_R1002_USEN
EVA P6000 Product
Packaging
EVA P6000 packaging consists of:
a 2U FC dual HSV340 controller assembly for the EVA P6300/P6350;
a 2U FC dual HSV360 controller for the EVA P6500/P6550;
a 2U 12-LFF bay Model M6612 SAS drive enclosure; and
a 2U 25-SFF bay Model M6625 SAS drive enclosure
EVA P6000 configurations allow a wide range of configuration options, including flexible factory rack-
mounting options in either a standard 42U cabinet (based on HP Racks) or a choice of 42U extended and
36U and 22U height.
The EVA P6300/P6350 is available in pre-configured Combo Kit or Starter Kit configurations only?. For
more information on these kits see the Configuration Section, Step 1.
Designed for No-Single-
Point-of-Failure
The EVA P6000 family's redundant architecture and value added software is designed to eliminate single-
points-of-failure from server to storage in clustered or single server configurations with multi-pathing.
HP P6000 SmartStart
configuration utility
The EVA P6000 is easily installable in a few to several hours, depending on the complexity of the
configuration, using HP P6000 SmartStart configuration utility. For Windows 2003 and 2008 application
servers, SmartStart software installs HBA drivers, Multi-pathing I/O (MPIO) drivers, the Storage System
Scripting Utility (SSSU) for Windows, P6000 Command View and optionally, installs P6000 Command View
on a Windows Server 2003 management server and helps provision the storage. HP P6000 SmartStart is
included as part of the P6000 Command View media kit.
Installation and Startup The EVA P6300/P6350 are designed to be Customer Self Installable. The larger and more complex EVA
P6500/P6550 have Installation and Startup (I&S) Services included in the purchase price.
For complex EVA P6300/P6350 environments, an optional Installation & Start-up service is available.
Below are descriptions of the I&S services available:
For factory configured, factory racked EVA P6300/P6350 orders and when final installation of just
the pre-configured EVA P6300/P6350 hardware at the customer site is required, purchase the Basic
I&S service when needed.
For factory configured, factory racked orders, without an existing P6000 Command View
management server, purchase the P6000 Command View Installation and Startup Service. This
service includes LUN design and implementation, HP Insight Remote Support software, and
customer orientation training.
For P6000 Continuous Access configurations, purchase the HP Data Replication Solution Service-
Continuous Access.
For Replication Solutions Manager, purchase the HP Data Replication Solution Service - Continuous
Access EVA or Business Copy EVA.
QuickSpecs
HP EVA P6000 Storage
Product Highlights
DA - 13904 Worldwide — Version 26 — September 30, 2013 Page 7