HP HP-97 - Page 158

CORVALLIS DIVISION
SERVICE
NOTE
97-104
Page 2 of 2
(...continued) Supersedes:
(A cackaro
The display will show -8.888888888-88 which allows inspection of all LED
segments. Switch to Program mode and press: GTO .200
f Print Prgm
As the program is being printed, switch to Trace mode. This tests the
interrogation of the switches. After the printer stops, try to record
a protected card (any one will do). Switch to Run mode, clear the error
and the display should show all segments again. This test is very quick
and does a good job of a final test on the calculator. It does not replace
the Data Store test or Heat Run-type tests.
For
more
information,
contact
the
Service
Engineering
Manager,
Corvallis
Division—1000
N.E.
Circle
Bivd., Corvallis,
Oregon
97330
Telephone
(503)
757-2000
¢
TWX
#
510-596-0683
Printed in U.S.A.