HP HP-97 User Manual

HP-97
3-12. INITIAL T
3-13.
a. Set switches
OFF MM ON
TRACE
MAN EHII NORM
PRGM IHIM RUN
b.
3-14,
3-15
table 3-3.
Press the keys listed in table 3-2.
EST
To run this test:
as follows:
Assembly-Level Maintenance
After each keystroke, the
calculator's display and printout should be identical to the numbers
If so, proceed to the program memory test (paragraph 3-14);
if not, return to step 28 in table 3-8.
indicated.
Table 3-2. Initial Test
KEYSTROKE DISPLAY PRINTOUT
(9] 9.
A 0.11 .68 1-X
7.
0.78 r.e8 X
-0.78 CHS
1. 00
1. 07
(6) 1. 76
a8 ~7.777777777-77 1.+476 £
0 -7.777777777-77
0.00 X&l
0 -7.777777777-77 RCOLI
-1.357478307-78 TAN
0 -1.357478307-78
-7.777777777-77 TAN-
-7.777777777-77
O -7.777777777-77 ST0I
0 -7.777777777-77
(1sz] -7.777777777-77
0 -7.777777777-77 121
0.00 CLX
@ ~7.777777777-77 RCL
PROGRAM MEMORY TEST
. To run the program memory test, follow the procedures given in
The displays indicated should be obtained.
If so, proceed to the
functional test (paragraph 3-16); if not, return to step 28 in table 3-8.
3-7

HP HP-97 Specifications

General

Brand	HP
Model	HP-97
Category	Calculator
Language	English