HP hx2190b - iPAQ Pocket PC - Protecting the Device Screen

Protecting the HP iPAQ Screen from Cracking or
Damage
CAUTION: The screen of your HP iPAQ is made of glass and can be
damaged or broken by drops, impacts, or pressure.
To reduce the risk of damage to the internal components, do not spray
liquid directly on the screen, or allow excess liquid to drip inside your
HP iPAQ. Using soap or other cleaning products on the screen might
discolor the finish and damage it.
●
HP is not responsible for damage that occurs as a result of your
failure to follow the instructions that came with the HP branded
product. Refer to the warranty document included with your HP iPAQ
for more information.
●
You should observe the following practices to protect the screen of
your HP iPAQ from damage:
◦
Do not sit on your HP iPAQ.
◦
When transporting your HP iPAQ in a purse, pocket, briefcase,
etc., ensure the device does not get compressed, bent,
dropped, or hit.
◦
When not in use, close the flip cover on your HP iPAQ and store
it in a case. You can select from a wide variety of case options
at
http://www.hp.com/go/ipaqaccessories or
http://www.casesonline.com.
●
Do not place anything on top of your HP iPAQ.
●
Do not bang your HP iPAQ against hard objects.
●
Never use any device other than the stylus that comes with the
HP iPAQ or an approved replacement to tap or write on the screen.
If you lose or break your stylus, you can order extras at
http://www.hp.com/go/ipaqaccessories.
●
Clean your HP iPAQ by wiping the screen and the exterior with a soft,
damp cloth lightly moistened only with water.
34