Where Do I Begin? 2-7
Where Do
I Begin?
2
Note Installation instructions are also contained in
the HP Web JetAdmin install file. Installation
instructions are also contained in the HP Web
JetAdmin readme file and in the online help.
Verifying Installation and Providing Access
●
Verify that the HP Web JetAdmin software is correctly installed
by navigating to it with your browser as shown in the following
example:
http://server.domain:port/\
where server.domain is the host name of your web server and
port is the port number assigned during installation.
●
Provide users access to HP Web JetAdmin software by adding a
link to your web server’s home page that is addressed to HP Web
JetAdmin’s URL. For example:
http://server.domain:port/
Configuring and Modifying a Device
Using your browser, navigate to HP Web JetAdmin’s URL. For
example: http://server.domain:port/
Follow the instructions on the appropriate home page to configure
or modify your printer. These instructions show you how to configure
the printer and set up a printer for printing.
Note You can also substitute the server.domain with the
TCP/IP address.
Removing HP Web JetAdmin Software
To remove HP Web JetAdmin software from your web server, use the
uninstall program provided with the software package.
0Book-asF01.book Page 7 Tuesday, August 14, 2001 2:06 PM
To Next Page
Loading...
Need help?
General
