4
NOTE: To ensure printer compatibility and maintain regulatory
1. Ensure the Jetdirect 2900nw accessory is disconnected from
the printer.
2. Go to www.hp.com/go/FutureSmart and select .
3. Find your printer and select the link.
4.
5. Follow the instructions for installing the Jetdirect 2900nw
accessory below.
Step A and B: Determine the location for the HP Jetdirect 2900nw:
• For best wireless signal strength, attach the 2900nw
• For easy access, attach the 2900nw directly to the printer.
Turn OFF the power to the printer.
Step A1, A2: To attach the 2900nw to the wall, attach one of the
supplied fastener strips to the 2900nw. Attach the other fastener
strip to a smooth, non-metal wall near the printer.
Step A3: Attach the 2900nw to the fastener strip on the wall.
Step A4-A6:
Wireless only connection:
1. Attach the USB Type-B (rounded) end of the cable to the USB
port on the back of the 2900nw.
2.
corresponding USB accessory port on the printer
Wireless + Ethernet (wired) connection:
1. Attach the USB Type-B (rounded) end of the cable to the USB port
on the back of the 2900nw, and also attach an Ethernet cable
(not provided) to the Ethernet port on the back of the 2900nw.
2. Attach other end of the Ethernet cable to your network.
3. Attach the Power supply cable to the 2900nw and connect the
power cord to the power source.
4.
corresponding USB accessory port on the printer.
NOTE: The type of power cable will vary by country/region.
NOTE: A wired network connection enables you to connect both
(or sub-nets).
Step B1, B2: To attach the 2900nw to the printer, attach one of the
supplied fastener strips to the 2900nw and place the other fastener
strip in the desired location on the printer.
Step B3: Attach the 2900nw to the fastener strip on the printer.
Step B4-B6: See A4-A6 above.
Step A7, B7:
will be shown under the Installed Personalities and Options section
appear on the printer’s control panel.
NOTE:
information at www.hp.com/support/jd2900nw.
For more information on mobile printing, go to:
www.hp.com/go/MobilePrinting
www.hp.com/go/WirelessPrinting
www.hp.com/support/jd2900nw
REMARQUE: pour garantir la compatibilité de l’imprimante et
la conformité réglementaire, mettez à jour le micrologiciel de
1.
2. www.hp.com/go/FutureSmart
(Mettre à niveau maintenant).
3.
Téléchargement du micrologiciel.
4.
5.
2900nw ci-dessous.
:
•
•
:
:
:
:
1.
2.
de l’accessoire correspondant situé sur l’imprimante.
:
1.
2.
3.
4.
REMARQUE:
:
:
l’imprimante.
:
la section Modes d’impression et options installés de la page de
sur le panneau de commande de l’imprimante.
REMARQUE:www.hp.com/support/jd2900nw pour
obtenir des informations supplémentaires concernant l’installation,
www.hp.com/go/MobilePrinting
www.hp.com/go/WirelessPrinting
www.hp.com/support/jd2900nw
EN FR
J8031-90902.indd 4 3/19/2018 6:08:25 PM
To Next Page
Loading...
