EN
Configuring for LPD Printing 67
1. To check whether you have Microsoft TCP/IP Printing protocol
and TCP/IP printing support:
■
Windows 2000—Click
Start
,
Settings
,
Control Panel
. Then
double-click the
Network and Dial-up Connections
folder.
Select the
Local Area Connection
for your network, then
click the
File
menu and select
Properties
.
If Internet Protocol (TCP/IP) is listed and enabled in the list
of components used by this connection, the necessary software
is already installed. (Proceed to “Configuring a Network
Printer for Windows 2000 Systems”). if not, go to step 2.
■
NT 4.0—Click
Start
,
Settings
,
Control Panel
. Then
double-click the
Network
option to display the
Network
dialog box.
If TCP/IP Protocol is listed in the Protocols tab, and Microsoft
TCP/IP Printing is listed in the Services tab, you have already
installed the necessary software. (Proceed to “Configuring a
Network Printer for Windows NT 4.0 Systems.”) If not, go to
step 2.
2. If you have not previously installed the software:
■
Windows 2000—In the
Local Area Connection Properties
window, click
Install
. In the
Select Network Component Type
window, select
Protocol
and click
Add
to add the
Internet
Protocol (TCP/IP)
.
Follow the instructions on the screen.
■
NT 4.0—Click the
Add
button for each tab and install the
TCP/IP Protocol
and the
Microsoft TCP/IP Printing
service.
Follow the instructions on the screen.
When prompted, type the full path to the Windows NT
distribution files (you may need your Windows NT workstation
or server CD-ROM).
To Next Page
Loading...
